ClearSounds TALK500 ER - Manual (Page 8)

8 – ENGLISH 9 – ENGLISH
Setting Speaker Volume Control.
You can adjust the speaker volume for a more comfortable listening
level by sliding the volume HI/LO switch.
Dialing A Call
1 pick up the handset or press button (the speaker LED will light)
and wait for a dial tone.
2 press the keypad for the telephone number you wish to dial. The
display will show the number that you dialed on the keypad. If you
dial a number over 14 digits long, it will show the last 14 digits only.
3 When you have completed your call, hang up the handset or press
button again to release the telephone line.
4 It is possible to switch from a handset conversation to a
speakerphone conversation by pressing the button and picking
up or hanging up the handset accordingly. To end a call when
using the speakerphone simply press again.
Pre-Dialing A Call
1 Dial the telephone number on the keypad. The telephone will
voice the digits dialed (with voice option YES) as well as display
them on the LCD. To correct a number press the DELETE button for
each incorrect digit.
2 Either a) pick up the handset, b) press button.
c) Press the DIAL button
Redial
To redial the last number called:
1 Lift the handset or press button.
2 Press the REDIAL button.
Note: The last number dialed manually (up to 32 digits long) can be redialed.
pause
You can insert a 3.6 seconds pause into dialing or storing a number
into memory in order to access custom and telephone banking
services, long distance, etc. press the REDIAL button at the desired
point in number. press the REDIAL button again if an additional 3.6
seconds is needed.
Receiving A Call
When you receive a call, the telephone rings, the Ringer LED flashes,
and the display shows the CALL# and the caller telephone number
(with Caller ID service activated), and says the name of the caller if
Talk500ER-Trilingual.indd 8 5/13/08 8:39:09 AM