Oldcastle BuildingEnvelope Reliance-TC - Manual (Page 17)

FRAME INSTALLATION
R E L I A N C E - T C C U R T A I N W A L L I N S T A L L A T I O N M A N U A L TM
Optional AW-525 and AW-425
head & sill not shown.
TM
MAY 2013 17
Phone: 1-866-OLDCASTLE (653-2278)
Web Address: www.oldcastlebe.com
2.3 If applicable, install cover plates for open back horizontals.
2.4 Wipe excess sealant from exposed areas. Tool sealant into the joint between the horizontal and
vertical at the glazing pocket. Avoid a buildup of sealant on the gasket surfaces or in the gasket reglets.
TIP: Use a short piece of glazing gasket to clean out excess sealant in glazing reglets. Also wipe excess
sealant away from the horizontal filler snap areas on rollover horizontals.
FIGURE 13
Horizontal Attachment
@ Type I Verticals