Rice Lake 720i Programmable Indicator/Controller - Installation Manual - Manual (Page 18)

12 720i Installation Manual
23 14626 Kep nuts, 8-32NC (7)* 2-8
24 53307 Label (1) 2-7
25 69291 3V Lithium coin battery
26 103989 Standoffs, F-F, 4-40 x 1.06 (3)
27 14825 Machine screws, 4-40NC x 1/4 (18)
28 102888 LCD display module, 240x64, universal (1)
29 16861 High voltage warning label (1)
30 67796 Power supply cable assembly, to CPU board (1)
31 67613 Power supply, ±6VDC, 25W (1)
32 103442 Power supply bracket (1)
33 103936 Component plate (1) 2-6
35 16892 Ground/Earth label (1) 2-8
36 15134 Lock washers, No. 8, Type A (3)
37 30376 Nylon seal ring for 1/2 NPT cord grip (1) 2-6
38 30375 Nylon seal rings for PG9 cord grips (3)
39 68599 Nylon seal ring for PG11 cord grip (1)
40 102377 Enclosure backplate, universal (1) 2-7
— 103458 Ribbon cable assembly, 7 in, 20-pin female, universal (1) —
— 103609 Cable assembly, CPU-to-display, universal (1) —
* Additional parts included in parts kit.
Universal Model Parts Kit Contents
104033 720i Software Tool Kit CD (1)
103988 Tilt stand washers (2)
103610 Tilt stand knobs (2)
42149 Rubber feet for tilt stand (4)
30623 Machine screws, 8-32NC x 7/16 (3)
14626 Kep nuts, 8-32NC (4)
14862 Machine screws, 8-32NC x 3/8 (5)
15134 Lock washers, No. 8, Type A (4)
15631 Cable ties (5)
15665 Reducing gland for 1/2 NPT cord grip (1)
19538 Cord grip plugs (4)
53075 Cable shield ground clamps (4)
75062 Sealing washers (8)
71344 10-position screw terminal for J6 (1)
76513 4-position screw terminals for J3 and J5 (2)
76514 6-position screw terminals for J1, J2 and J4 (3)
94422 Capacity label (1)
Ref Number PN Description (Quantity) See Figure
Table 2-6. Universal Model Replacement Parts (Continued)