Rice Lake 720i Programmable Indicator/Controller - Installation Manual - Manual (Page 70)

64 720i Installation Manual
Advance Mode Management Menu
In Advance Mode the Weigh , Reports and Management softkeys are enabled. The Management softkey is
described below.
WEIGH REPORTS MANAGEMENT
ADD
DELETE
EDIT CUSTOMER EDIT SOURCE DELETE TRANS.
INCOMPLETE
ALL
EDIT MATERIAL
COMPLETE
NO
YES
ADD
DELETE
ADD
DELETE
Note
While in a submenu the TARE key can be pressed to go back to the previous menu. If using the PS2
keyboard, the ESC key will take you to the previous menu.
Figure 7-5. Management Menu
Table 7-7. Management Menu Parameters
Management Menu
Parameter Choices Description
Level 2 submenus
EDIT MATERIAL ADD
DELETE Add or delete material
EDIT CUSTOMER ADD
DELETE
Add or delete customers
Note
The system can store a total 99 customers, files and source
numbers. These records must be keyed in as there is no file upload
or download available.
EDIT SOURCE ADD
DELETE Add or delete source
DELETE TRANS. ALL
INCOMPLETE
COMPLETE Specifies which transactions to delete. The system offers a Yes or No to confirm
prompt before the transactions are deleted. The system can store 1496 transactions.
Note You must manually delete the transactions when the system is full.