Crestron electronic Multimedia Presentation System 300 MPS-300 - Manual (Page 11)

Crestron MPS-300 Multimedia Presentation System 300
MPS-300 Specifications (Continued)
SPECIFICATION DETAILS
Video/RGB
Switcher
Signal Types
Video/HDTV Formats
RGB Formats
Maximum Resolution
Blanking Time
Sync Rise/Fall Time
Sync Latency
Gain
QM Cable Compensation
8x7 crosspoint matrix including 3x3 QM
signal routing, QM delay skew
compensation
RGB and composite, S-video, or
component video (does not transcode)
NTSC or PAL, HDTV up to 1080i/1080p
RGBHV or RGBS
QXGA 2048 x 1536 @ 60Hz
(WUXGA 1920 x 1200 @ 60Hz via QM)
< 0.1 second
3.5 ns maximum
< 30 ns
0dB (75 ohms terminated)
10-bit digitally controlled PEAK (bandwidth)
and BOOST (frequency); 4-bit digitally
controlled SKEW delay, 0 to 22 ns
(independent for R, G, and B)
Audio
Switcher/Preamp
A-D/D-A Conversion
Output Volume Range
Mixer Volume Range
Mute
Input Compensation
Mic Input Gain
Gate Level (Threshold)
Gate Attack Time
Gate Decay (Release) Time
Gating Depth
Compressor Curve
Compressor Threshold Level
Compressor Attack Time
Compressor Release Time
Compression Ratio
8x4 stereo crosspoint matrix including 3x3
QM signal routing, 2-channel gated mic
preamp with compressor and limiter,
8-channels mic EQ, 10x5 mic/program
matrix mixer, 8x2 mic matrix mixer per each
of 3 QM outputs, stereo volume/tone control
and EQ per each of PROGRAM and
RECORD outputs, mono volume/tone
control and EQ/delay on SPEECH output,
integrated power amplifier, QM auto-
compensation with self-peaking
24-bit, 48 kHz
-80dB to +20dB, 0.1dB steps
-80dB to 0dB, 0.1dB steps
-100dB (electronic), -120dB (relay)
±10dB, 0.1dB steps
0 to 100% (40dB range) plus mute
0 to 100%
0 to 100 ms
0 to 5000 ms
-80dB to 0dB, 0.1dB steps
Selectable hard or soft knee
-80dB to 20dB, 0.1dB steps
0.1 to 300 ms
1 to 500 ms
1:1 (no compression) to
10:1 (maximum compression)
(Continued on following page)
Operations Guide – DOC. 6529B Multimedia Presentation System 300: MPS-300
• 7