Crestron electronic Multimedia Presentation System 300 MPS-300 - Manual (Page 17)

Crestron MPS-300 Multimedia Presentation System 300
Connectors, Controls & Indicators
# CONNECTORS
1
,
CONTROLS &
INDICATORS
DESCRIPTION
1 NET LED (1) yellow LED, indicates Cresnet bus activity.
2 MSG LED (1) yellow LED, illuminates when a message is
present in the message log. To view the
contents of the message log, use the front
panel buttons or Crestron Toolbox™.
3 & 4 RESET BUTTONS HW-R – Initiates system hardware reset.
SW-R – Pressing this in combination with
HW-R button performs a system restart without
loading the program. Pressing it alone
momentarily while the system is running
restarts the program.
5 COMPUTER
Pin 1 Pin 2
Pin 4 Pin 3
(1) USB Type B female; USB 1.1 computer
console port (cable included)
PIN DESCRIPTION
1 +5 VDC
2 Data -
3 Data +
4 Ground
6 PROGRAM OUT (L/R) (1) 5-pin 3.5 mm detachable terminal block;
Balanced/unbalanced stereo line-level output;
Output Impedance: 200 ohms balanced,
100 ohms unbalanced;
Maximum Output Level: 4 V
rms
balanced,
2 V
rms
unbalanced
7 AUDIO INPUTS 1-5 (5) 5-pin 3.5 mm detachable terminal blocks;
Balanced/unbalanced stereo line-level inputs;
Input Impedance: 24k ohms
balanced/unbalanced;
Balanced Input Level: -20 to +12 dBV;
4 V
rms
maximum;
Unbalanced Input Level: -20 to +6 dBV;
2 V
rms
maximum
(Continued on following page)
Operations Guide – DOC. 6529B Multimedia Presentation System 300: MPS-300
• 13