Spch. min volume 30 – Crestron electronic Multimedia Presentation System 300 MPS-300 User Manual

Page 52

Advertising
background image

Multimedia Presentation System 300

Crestron MPS-300

• Set the SPEECH output’s Minimum and Maximum Volume levels to 30%

and 70% (respectively) as described below.

• Set the Startup Volume levels of the “loudest” outputs (PROGRAM or

SPEECH) to 100% as described on pages 42 and 49 so maximum dynamic
range is available.

• Set the Master Startup Volume to the desired level (will probably be less

than 50%). Refer to the instructions on page 53.

Set the Speech Minimum
Volume

The Speech Minimum Volume control is used to set the lowest volume setting of the
SPEECH output. The RECORD and PROGRAM outputs are not affected by
changes made to the Speech Minimum Volume level.

To set the Speech Minimum Volume level:

• Access the Speech Output menu as described on page 43.
• Press the k or j buttons until “Min Volume” is displayed on the LCD and

press ENTER to open the Speech Minimum Volume controls.

Speech Minimum Volume Control

Spch. Min Volume

30%

• Adjust the Speech Minimum Volume level with the j and k buttons.

Press the k button to increase the Speech Minimum Volume level. Press
the j button to lower the Speech Minimum Volume level. The highest
Speech Minimum Volume setting is 30%.

NOTE: While adjusting the Speech Minimum Volume level, the Speech
Volume level can be adjusted by turning the volume control clockwise to
raise the volume, or counterclockwise to lower the volume. When adjusting
the volume, the display will change to indicate the volume level.

• Press MENU or ENTER to save changes and return to the previous screen.

Set the Speech Maximum
Volume

The Speech Maximum Volume control is used to set the highest volume setting of
the SPEECH output. The RECORD and PROGRAM outputs are not affected by
changes made to the Speech Maximum Volume level.

To set the Speech Maximum Volume level:

• Access the Speech Output menu as described on page 43.
• Press the k or j buttons until “Max Volume” is displayed on the LCD and

press ENTER to open the Speech Maximum Volume controls.

48

Multimedia Presentation System 300: MPS-300

Operations Guide – DOC. 6529B

Advertising