Crestron electronic Multimedia Presentation System 300 MPS-300 - Manual (Page 37)

Crestron MPS-300 Multimedia Presentation System 300
To save settings for later use, use Crestron Toolbox’ File Manager utility to retrieve
the *.xml (where * can be “ootbf” for settings made when running the out-of-the-box
functionality program or “custom” for settings made when running a custom
program) and System Configuration.txt files from the NVRAM Disk directory. After
the new out-of-the-box functionality program or custom program has been loaded,
use Windows Explorer and Crestron Toolbox’ File Manager utility to place the
appropriate *.xml and System Configuration.txt files in the NVRAM Disk directory
and reboot the processor. For instructions on using Crestron Toolbox’ File Manager
utility, refer to the Crestron Toolbox help file.
NOTE: If switching to a different type of program (i.e. from out-of-the-box
functionality to custom or vice-versa), the retrieved xml file can be renamed
(ootbf.xml becomes custom.xml and custom.xml becomes ootbf.xml). The running
program will import any relevant settings. Verify that all of the required settings are
correct.
Operations Guide – DOC. 6529B Multimedia Presentation System 300: MPS-300
• 33