Crestron electronic Multimedia Presentation System 300 MPS-300 - Manual (Page 50)

Multimedia Presentation System 300 Crestron MPS-300
Set the Speech Delay To set the Speech Delay:
• Access the Speech Output menu as described on page 43.
• Press the k or j buttons until “Speech Delay” is displayed on the LCD
and press ENTER to open the Speech Delay controls. The current speech
delay will be displayed.
Speech Delay Control
Speech Delay
0ms
• Adjust the Speech Delay with the j and k buttons. Press the k button to
increase the delay. Press the j button to lower the delay. The highest delay
setting is 40 milliseconds.
NOTE: While adjusting the Speech Delay, the Speech Volume level can
be adjusted by turning the volume control clockwise to raise the volume, or
counterclockwise to lower the volume. When adjusting the volume, the
display will change to indicate the volume level.
• Press MENU or ENTER to save changes and return to the previous screen.
Change the Volume Control
Mode The operating mode of the volume control knob can be set to adjust the program
volume, the speech volume, user-selectable program/speech volume, or the master
volume. To change the Volume Control Mode:
• Access the Speech Output menu as described on page 43.
• Press the k or j buttons until “Prog/Spch Vol.” is displayed on the LCD
and press ENTER to open the Volume Control Mode controls.
Volume Control Mode Control
Prog/Spch Vol.
Program Only
46
• Multimedia Presentation System 300: MPS-300
Operations Guide – DOC. 6529B