Crestron electronic Multimedia Presentation System 300 MPS-300 - Manual (Page 79)

Crestron MPS-300 Multimedia Presentation System 300
Restore Defaults Menu-All Settings
Restore Defaults
All settings
⇒ Press the k or j buttons until “All settings” is displayed on the LCD
and press ENTER.
Confirm Restore All Default Settings Only
Reset all settings?
No
⇒ Press the k or j buttons until “Yes” is displayed on the LCD and
press ENTER to restore the audio settings, source names, output
names, and function names to the factory defaults. To cancel, press the
k
or j buttons until “No” is displayed on the LCD and press
ENTER.
• To cancel:
⇒ Press the k or j buttons until “Abort” is displayed on the LCD and
press ENTER. The restore operation will be cancelled.
Cancel Restore Operation
Restore Defaults
Abort
Front Panel Lock Control The MPS-300’s front panel controls can be locked to prevent operational changes
from the buttons on the front of the MPS-300. While locked, the menu can be
accessed by pressing the MENU button. To open the Front Panel Lock control:
• Access the Control Setup menu as described on page 66.
Operations Guide – DOC. 6529B Multimedia Presentation System 300: MPS-300
• 75