Crestron electronic Multimedia Presentation System 300 MPS-300 - Manual (Page 9)

Crestron MPS-300 Multimedia Presentation System 300
For more information on this and other QM applications, refer to the latest revision
of the Crestron MediaManager Applications Guide (Doc. 6244), which is available
from the Crestron website (
http://www.crestron.com/manuals ).
Internal Block Diagram
The following diagrams represent the video and audio switching abilities of the
MPS-300.
Video Block Diagram of the MPS-300
8x7
Matrix
Switch
Composite
VIDEO INPUTS
S-Video
Component
RGBHV
QM INPUTS
QM OUT 6
VIDEO OUTPUTS
RGBHV
RGBHV
RGBHV
1
2
3
4
5
QM to
Analog
RGBHV
Analog
to QM
QM OUT 7
6
7
CH
Balanced
Video OUT
RGBHV
QM OUT
TOUCH
PANEL
PORT
(Composite/
S-Video/
Component)
8
LOCAL OUT 1
5
LOCAL OUT 2
LOCAL OUT 3
LOCAL OUT 4
RGB Signal Detection
RGB Signal Detection
RGB Signal Detection
Composite/S-Video/YPbPr
Composite/S-Video/YPbPr
Composite/S-Video/
YPbPr Signal Detection
Composite/S-Video/
YPbPr Signal Detection
Analog
to QM
Analog
to QM
QM to
Analog
QM to
Analog
RGB
Delay
LP
Filter
RGBHV
RGBHV
6x6
QM Matrix
LOCAL OUT 1 and LOCAL OUT 2 can be combined to one component output.
LOCAL OUT 3 can be used for composite, S-video, or component video. The
MPS-300 does not convert input signal formats.
Operations Guide – DOC. 6529B Multimedia Presentation System 300: MPS-300
• 5