Crestron electronic Multimedia Presentation System 300 MPS-300 - Manual (Page 71)

Crestron MPS-300 Multimedia Presentation System 300
Select Function to Name
Select Fct. To Name
1:MUTE
• Press the k or j buttons until the function to be named is displayed on the
LCD and press ENTER. The cursor is placed after the last character in the
function name.
Name the Function
MUTE_
DEL INS < >
• Turn the volume control clockwise or counterclockwise (or press the k or
j buttons) to select a new letter (uppercase or lowercase) or number. Move
the cursor by pressing the soft buttons labeled < or >. Each function name
can be up to 14 characters in length. To delete a character, position the
cursor under the character to be deleted and press the soft button labeled
DEL. To insert a space, position the cursor where the space is to be inserted
and press the soft button labeled INS.
• Press ENTER to save the new name and return to the Function Naming
menu or press MENU to cancel the operation and return to the Function
Naming menu.
• After all functions have been named, press MENU to return to the Control
Setup menu.
Identify Network Devices Use the front panel to identify the presence of Cresnet devices such as APAD,
C2N-DB12, CNX-B12, and C2N-FTB keypads, C2N-MNETGW gateways, CLS-C6
lighting systems, and QM-AMP amplifiers:
• Access the Control Setup menu as described on page 66.
• Press the k or j buttons until “Devices” is displayed on the LCD and
press ENTER.
• The MPS-300 will poll the Cresnet network to detect Cresnet devices. The
display will prompt the user to press ENTER to ID all devices.
Operations Guide – DOC. 6529B Multimedia Presentation System 300: MPS-300
• 67