Control panel when embroidering, Step between color blocks – SINGER XL-580 User Manual

Page 104

Advertising
background image

102

CONTROL PANEL WHEN

EMBROIDERING

When embroidering, the dials on the control panel are used to

step through the design color by color and within a color block.
After transferring desired design(s) to your FUTURA sewing

and embroidery machine, the display shows number of current

color block and total number of color blocks as illustrated.

The three horizontal lines indicate the beginning (bottom line),

middle and end (top line) of the current color block. As the

block is stitched out, a progress bar on the right side of the

display will show the approximate current position in the color

block.

Go to stitch position

Allez à la position de

couture

Vaya a la posición de

puntada

Step between

color blocks

Étape entre les

blocs de couleurs

Paso entre

bloques de color

OK

OK

OK

STEP BETWEEN COLOR BLOCKS

To step between the transferred color blocks, press the center

of the lower dial. “BL” is shown on the display. The arrows

indicate which direction you can step between the color

blocks.
Turn the lower dial. The current color block number changes.

When having reached desired color block, press OK. The

KRRSPRYHVWRWKHSRVLWLRQRIWKH¿UVWVWLWFKLQVHOHFWHGFRORU

block.

GO TO APPROXIMATE STITCH POSITION

WITHIN A COLOR BLOCK

To go to a certain part of current color block, press the center

of the upper dial. The horizontal line on the display indicate

the approximate current position in the color block.
Turn the upper dial clockwise to step forward, and counter-

clockwise to step backward in the design. Each step equals

one tenth of the color block.
Example: If a color block contains 150 stitches, each step

corresponds to 15 stitches.

When having reached desired position in the color block,

press OK. The hoop moves to that position. Fine tune by using

the Needle Stop Up/Down and Reverse buttons as described

on page 82 - 83.

Advertising
This manual is related to the following products: