Inserting zippers and piping, Hand-look quilt stitch, Straight stitch with auto tie-off function – SINGER XL-580 User Manual

Page 40

Advertising
background image

38

02

Aguja a la izquierda del

prensatelas

Aguja a la derecha del

prensatelas

Needle to left of foot
Aiguille à gauche du pied presseur
Aguja a la izquierda del

prensatelas

Needle to right of foot
Aiguille à droite du pied presseur
Aguja a la derecha del

prensatelas

INSERTING ZIPPERS AND PIPING

Use the zipper foot to sew to the right or left of the zipper or to

sew close to a cord.

INSERTING ZIPPERS

To sew down the right side, attach left side of zipper foot to

presser foot holder so that the needle passes through the

opening on the left side of the foot.
To sew down the left side, attach right side of foot to foot

holder.

PIPING

&UHDWHDSLSLQJE\FRYHULQJD¿OOHUFRUGZLWKDELDVVWULSRIIDEULF

Attach the right side of the zipper foot to the foot holder so that

the needle passes through the right side of the zipper foot.

%DVWHWKHVHDPDOORZDQFHVWRJHWKHUHQFORVLQJWKH¿OOHUFRUG

forming seam tape for the piping.

Helpful Hint: Slight adjusting of the needle position to

sew closer to the piping may be accomplished with

the Stitch Width Control.

HAND-LOOK QUILT STITCH

This stitch is designed to look like hand sewing for topstitching

and quilting.
1. Thread bobbin with desired top stitching color.
2. Thread the needle with either invisible thread or with thread

that is a color which blends in with the fabric color, so it

doesn’t show.

3. Increase thread tension toward 6 or higher until you

achieve the desired appearance.

4. Set the stitich length at 4 (maximum).
5. Start to sew.

STRAIGHT STITCH WITH AUTO

TIE-OFF FUNCTION

1. Press the foot control and the machine will sew 4 stitches

forward and then 4 stitches in reverse and continue to sew

forward until the foot control is released.

2. Press the reverse button and the machine will sew 4

stitches in reverse and then 4 stitches in forward and stop.

16

Advertising
This manual is related to the following products: