Welch Allyn 20хEL Propaq Encore Vital Signs Monitor - Reference Guide - Manual (Page 164)

Welch Allyn 164 Propaq Encore Reference Guide
Equipment Alert
Occurs when the Propaq Encore detects an equipment condition requiring operator
assistance. A message describing the condition is displayed.
Equipment Alert Window
The window that appears during an equipment alert.
Error Message
The message that appears when the monitor detects a malfunction requiring factory service.
Error Message Window
The window that appears when the monitor detects a malfunction requiring factory service.
This window contains error messages and numbers.
Error Number
The number that identifies a problem encountered during operation.
ESD
An acronym for Electrostatic Discharge (from static electricity).
ESIS
An acronym for Electrosurgery Interference Suppression.
ETCO
2
An acronym for end-tidal CO
2
. Amount of CO
2
breathed out at the end of an exhalation.
Factory Default Settings
The current values for all Propaq Encore settable functions when the monitor was shipped
from the factory.
Freeze
The action taken by the FREEZE button to stop the display. If three waveforms are displayed,
all waveforms are frozen. If less than three waveforms are displayed, the current waveforms
are frozen and the top waveform is also shown in real-time. See also Unfreeze.