Welch Allyn 20хEL Propaq Encore Vital Signs Monitor - Reference Guide - Manual (Page 55)

Invasive Pressure
Propaq Encore Reference Guide 55 Welch Allyn
ZERO REJECTED (or REJECT). Unable to establish a zero reference value. The message
remains until the
CANCEL
button is pressed.
CANCELED. This message appears if CANCEL is pressed while the channel is zeroing.
These equipment messages can appear in an equipment alert window.
TRANSDUCER NOT DETECTED. The transducer connection is broken.
TRANSDUCER SHORT CIRCUIT. This message appears when the Propaq Encore
senses a short in the transducer. The transducer should be replaced.
INCOMPATIBLE TRANSDUCER . Check the compatible transducers listed in the Welch
Allyn Products and Accessories booklet to ensure you are using a compatible transducer.