Welch Allyn Vital Signs Monitor, Propaq Encore - Quick Reference Guide - Manual (Page 122)

116 Specifications Welch Allyn Propaq Encore Vital Signs Monitor
Power
Characteristic Specification
Mode of Operation Continuous
Battery Pack Type Sealed, gel-type lead acid
Battery Pack Capacity Monitor only: 8 volts, 3 Ampere-Hours; Monitor with Expansion Modules: 8
volts, 6 Ampere-Hours
Battery Recharger Circuitry Internal, powered by external power adapter
DC Input Power Required 12 to 28 Volts, 25 Watts
Input Fuse Rating 3A/250V, Type 2AG (0.57x 0.177 in)
Operating Times on Battery
Monitor only
Monitor and SpO2 (Baqpaq)
Monitor with Expansion Module with
printer, SpO2 and CO2 Options
2 hours
5 hours
3 hours
Battery Recharge Time with instrument
on Range of 8 hours to 12 hours typical, depending upon product configuration
Battery Recharge Time with instrument
off Range of 6 hours to 8 hours depending upon product configuration
Recharge time until monitor is usable,
starting with discharged but non-faulty
battery
 2 minutes typically (longer time required before NIBP, printer, and CO
2
are
available)