Wine Guardian Ducted Wine Cellar Cooling Systems (WG175) - Manual - Manual (Page 53)

49
Alarm Codes 报警代码
High temperature
alarm
高温警报
Flashing
temperature
number
Press the “Up” or “Down” arrow once to change
screen from alarm to normal Temperature and
Humidity indication. “Flashing temperature number”
Along with flashing (!) symbol will remain on screen
until temperature falls below the High Temperature
Alarm set point (Setting 3).
按“向上”或“向下”箭头更改屏幕上
的从报警到正常温度和湿度指示。 “高
温”将持续在屏幕上，直到温度降低于
高温报警设定点（设置 3。
Low temperature
alarm
Flashing temperature
number
Press the “Up” or “Down” arrow once to change
screen from alarm to normal Temperature and
Humidity indication. “Flashing temperature number”
Along with flashing (!) symbol will remain on screen
until temperature rises above the Low Temperature
Alarm set point (Setting 2).
按“向上”或“向下”箭头更改屏幕上
的从报警到正常温度和湿度指示。 “低
温”将持续在屏幕上，直到温度升至低
温报警设定点（设置 2）。
High humidity alarm
Flashing humidity
number
Press the “Up” or “Down” arrow once to change
screen from alarm to normal Temperature and
Humidity indication. “Flashing humidity number”
Along with flashing (!) symbol will remain on screen
until humidity falls below the High Humidity Alarm
set point (Setting 5).
按“向上”或“向下”箭头更改屏幕上
的从报警到正常温度和湿度指示。 “高
湿度”将持续在屏幕上，直到湿度降低
于高湿度 报警设定点（设置 5）。
Low humidity alarm
Flashin humidity
number
Press the “Up” or “Down” arrow once to change
screen from alarm to normal Temperature and
Humidity indication. “Flashing humidity number”
Along with flashing (!) symbol will remain on screen
until humidity rises above the Low Humidity Alarm
set point (Setting 4).
按“向上”或“向下”箭头更改屏幕上
的从报警到正常温度和湿度指示。 “低
湿度”将持续在屏幕上，直到湿度降升
至 低湿度 报警设定点（设置 5）。
USER MANUAL ONLY