Garmin GPS 65 - Manual (Page 11)

2^ CURSOR AND FIELDS
Cyclic Field
Confirmation Field
Rté^0 ►flctiviite'?
GflRMIN___ ♦_____
KVflP
178* 1.83
CLIFF 263^ 3.51
HftRBCK 330* 5.05
MIDRMR 0^2* 5.00
ftTE
Bar Field
Tone H1S6 and Key
Change Contrast?
Backlight Timeout:
30 seconds
The area of the page which is highlighted in reverse video is called the
cursor. The cursor may be moved to locations on the page called Reids
which allow you to enter data or change options. You will encounter five
types of fields.
- Numeric Reids accept numbers only,
* Alphanumeric fields accept numbers as well as letters.
* Cyclic Reids allow selection from several available options. A
^clic field is preceded by a prompt!^). You may cycle through the
choices by pushing CLR.
* Confirmation fields allow you to indicate your approved. For
example, you will be asked to confirm that you want to delete a
wa
3
rpoint. Confirmation fields always end with a character.
Press ENT to approve the confirmation field.
* Bar fields allow an adjustable scale entry with the length of the
bar representing the minimum to maximum setting. Use your
arrow keys to make adjustments in bгu■ fields.
2.4 KEYPAD OPERATION
The PWR/STAT key is a dual function key that controls unit
power and system status. Pressir^ this when the unitis off will
turn the unit on. To turn the unit off, press and hold PWE/
STAT imtil the display is blank.
Pressir^PWR/STATmomentarity while Uie unit is on will take
you to the status pages (see Section 3.2). If the message
annunciator is flashing and the tone sounds, you may push
PWR/STAT to view the message.
P W R
S T A T
2-2