Garmin GPS 65 - Manual (Page 12)

" g o t o
Hoe
A U T O
S T O
Pressing GOTO/MOB once allows you to initiate the GOTO
function, setting an instantaneous course to any waypoint
(see Section 3.7). Pressii^ GOTO/MOB twice allows you to
initiate the Man Overboard function, setting an immediate
course to the captured position (see Section 3.9).
Pressing AUTOSTORE allows you to capture your present
position instantaneously (see Section 3.6).
K A V
Pressing NAV selects the Navigation Pages which allow you
to view navigation information and the Plot Page (see Section
3.8).
&
@
Pressing WPT selects the Waypoint Pages which allow you to
create, edit, delete, and rename wa
3
rpoints. In addition, you
may view nearest waypoints or proximity waypoints (see
Sections 3.4,3.5 and Chapter 5).
Pressii^ RTE selects the Route Pages which allow you to edit,
review, activate, and delete routes (see Chapter 4).
Pressing either of the arrow keys allows you to move
the cursor, scroll through information lists, and enter
letters of the alphabet.
© /'
yz
^ The alphanumeric keys allow you to enter letters and
numbers. Use the arrow keys to select the desired
letter or number.
Pressing this key while the cursor is not on a numeric or
V * V alphanumeric field allows you to change the backlight level.
There are two backlighting levels.
C L R
J Pressing CLR erases information in the cursor field. If the
cursor is over a cyclic field, pressing CLR will toggle through
severed aveiilable options.
Pressing ENT confirms an entry or selection.
2-3