Garmin GPS 65 - Manual (Page 39)

eGftRrilH/GflRIlIH
1маад1нвнадд|Ц|
2WPT1 /WPT2
3 _______ /_______
4 _________ /_________
5 _______ /_______
____ ши_______КТЕ LIST
To Activate a Route...
Highlight the route you wish to
activate with the arrow keys.
Press ENT. The Route Definition
Page is displayed with the
“>Activate?* action highlighted.
Press ENT to Activate the route.
To Delete a Route.«
' HigiU^t the route you wish to delete with the arrow keys. Press
CLR. The Route Definition Page is displayed with the *SClear?”
action highlighted.
• Press ENT to delete the route.
Building Routes with AutoStore».
The GPS 65's AutoStore*™ feature is the quickest and easiest way to
build a route as you go. With autostore, each time you turn on a new
track, pass a significant landmark, or reach some location of interest,
you can save the location and create a route at the same time. Each
autostore wa
3
rpoint can be added to the same route as you are traveling.
AUTOSTORE
ирт:еве
H 39°ee.eee’
fltopend to Routel^H
* With the unit operatili in 2D or
3D Navigation mode, press Üie
AUTOSTO key to save your
starting location.
• At this point, you may change the
AutoStore name, if you wish (see
Section 3.6).
Select an empty route to store the waypoint into by highlighting
the "Append to Route >_?” field and pressing CLR until the desired
route number is displayed.
Press ENT to add tbe waypoint to the selected route.
Repeat these steps each time you arrive at a location you wish to
add to the route, up to a total of 20 waypoints per route.
4-6