Posn ^hddcl^min.inmm – Garmin GPS 65 User Manual
Page 45
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
If the planned course will be primarily strai^t line travel, you shotUd
select ^‘Resolution” storage. In this application, considerably less
memory is used for the same distance traveled.
To store the Ground Track by Kesolutiw«,
•
HighlifidttthestoragefrequencyfieIdandselect‘‘Resolution”with
CLR.
• Press ENT.
• Enter the resolution rai^, and press ENT. When your position
moves this defined range offaprojected courseline, anew position
is added to the stored ground track.
The track storingfunction may be turned on andofTby hi^dightingthe
‘Track>” field find pressing CLR. From this same field, the track may
be set to Vrap” around through available memory (deleting the oldest
track information and using the memory to store the new track
position). The amount of memory, used at any given moment, is shown
on the bottom line. When available memory is filled or the track is no
longer needed, it may be cleared by highlighting *‘Clefir?” and pressing
ENT.
6.3
UNTTS/HEADING
SETUP
UHlTf / HEAD»«-------
Posn ^hddcl^min.inmm'
Hav ^nciutical
Hd9 ^tiuto mtig
The Units/Heading Page is used to
select the units to display for
position, distance, speed and
heading information. Select the
desired
position
units
by
highhghting the ^SN” field and
pressing CLR You may choose
between d^reescnlyChddd.ddddd");
degrees and minutes (hddd**mm.mmm*); degrees, minutes and seconds
(hddd'’mm’ss.s”); UTM/UPS; or various regional grid coordinates.
Select the desired distance and speed units by highli^ting the ^AV”
field and pressing CLR You may choose between nautical (nautical
milea/knots/feet), statute (statute miles/miles per hour/feet), or metric
(kilometers/kilometers per hour/meters) units.
Heading information can be displayed referencing magnetic north
(automatically calculated or user-defined), referendng true north or
referencing calculated grid headings. Select the desired heading
reference by highhghting the “HDG” field and pressing CLR When the
“Auto Mag Var[iation]” option is selected, headii^ information will
6-3