Garmin GPS 65 - Manual (Page 54)

APPENDIX A
MESSAGES
The GPS 65 uses the Message Page to communicate important
information to you. Some messages are advisory in nature, others are
warnings that may require your intervention. This appendix provides
a complete list of messages and their meanii^. Please pay careful
attention to all messages.
Alairm Clock - The alarm time for the alarm clock has been reached.
Anchor Dri^ Alarm - Your craft has drifted outside the anchor dr£^
radius set on the Alarm Page.
Approaching_____ • You are less than one minute from readme the
indicated waypoint.
Arrival At_____ - Your craft has entered the arrival alarm circle for the
indicated destination waypoint.
Cant Chng Activ WPT - An attempt has been made to modify the
position of the “active to” or “active from” waypoint. The GPS 65 will not
allow the modifications.
Degraded Accuracy • The accuracy of the GPS 65 position is degraded
beyond500meters due to satellite geometry or data quality. Additional
cross checking should be performed by the user to verify the integrity
of the GPS position.
Memory Battery Low • The battery that sustains user memory is low
and should be replaced by an authorized GARMIN service center as soon
as possible. Failture to do so may result in loss of stored data, including
all waypoints and routes.
No DGPS Position - Not enough DGPS data is available to compute
a corrected position.
No RTCM Input - A beacon receiver is improperly connected to the
input port on the back of the GPS 65, a connected beacon receiver is not
transmitting in an RTCM SC-104 version 2.0 format, or the baud rates
do not match between the GPS 65 and the beacon receiver.
A-1