Garmin GPS 65 - Manual (Page 43)

CHAPTER 6
AUXILIARY FUNCTIONS
Op Mode Plottin9
Units IHdg flIctrmICDI
Date ¡Time fludiolDspI
Intrtace Map Datm
Ben Revr Sun Plan
Trip Plan Messages
■aawaMiaiimjl nuM
The GPS 65's auxiliary pages allow you to do utility and setup functions
to customize your unit. The 11 audliaiy pages are accessible from the
auxiliary menu (see Section 3.2) by highlighting the page you want and
pressing ENT. The softkeys allow changing to previous (PREV) and
next (NEXT) pages. The AUX softkey takes you back to the Auxiliary
Menu Page.
0.1 OPERATING MODE AND FILTERS
---------«»ftATIN« mi--------------------
^Simulator
FILTERS
Position ^automatic
Velocity ^automatic
From this page, you may change
between various operating modes
by h^hli^ting the “OPERATING
MODE^fieldandpressingCLR. You
may select simulator mode, normal
mode, or battery saver mode. (See
Section 2.7 for a description of each
mode.)
Also from this page, tiie position and velocity filters may he changed.
Changing the filter settings will alter the GE*S 6S's response time to
changes in track or groimd speed. To change the filter settings,
highlight the appropriate field and cycle throu^ the filter settings
(automatic, fast, me^um, and slow) with CLR. The “Fast” setting will
provide instantaneous response (three seconds maximum response
time) to changing conditions. The “Medium” (approximately 20 seconds)
OT “Slow” (approximately 120 seconds) settings may be more desirable
for slow speed operation where frequent ground track changes will
occur (e.g. sailing or hiking). It is highly recommended that you select
the “Automatic” setting for most applications.
6-1