Garmin GPS 65 - Manual (Page 52)

To calculate the muuise/snnaet times for a waypoint.»
• Highli^tthewaypointnamefieldandenterihedesiredwaypoint
name.
• Press ENT
. The date field is hi^li^ted. Enter the day, then month, then
year to calculate the sunrise/simset times. Press ENT on each
alphanumeric field.
• Once the year is selected and ENT is pressed, the calculated
sunrise and sunset times will be shown. Please note that the times
shown wUl be either UTC or local depending on the selection made
on the Date/Kme Page. (See Section 6.5.)
6i.ll TRIP AND FUEL PLANNING
TRIP Zi FUEL PLANNINC
^RTE L«9
h
RZRBCK-^MIDANR
SPD¡ 0.0*
t
FI
o
W: 8
DTK 0^2^ REQ 0.9
RHG5.80R.ETE 8=08
The Trip and Fuel Planning Page
allows you to calculate time and fuel
requirements between any two
waypoints or for any pri^rammed
route. On the first qrdic field, you
will choose between waypoint(WFD
or route (RTE) planning by
________________________ higdili^ting and pressing CLR. If
route planning is selected, you would tiien select the desired route
number and the portion of the route (a given 1^ or all of the route) to
calculate for.
The final step is to enter speed and fuel flow rates. The GPS 65 will then
calculate the desired track (DTIO, fuel requirements (REQ), range
(RNG), and estimated time enroute (ETE).
To perform a Trip and Fud Plan, wasrpoint to waypoint».
"TifiFsrTUETTPiinmre-
»RTE ^0 Le9 SID
Gf^RMINv^GFlRMIN
SPD* 25*T Flow: 7
DTK___ ♦ RE« 6.3
RNG22.7Ü.ETE 5422
___ PREU RUM MEXT__
Highlight the first cyclic field (top
left), and press CLR to select
"WPTS:".
Hi^ilifht the waypointname field
(second line), and enter the first
waypoint name followed by ENT.
The second w^point name field is now highlightad. Enter the
second waypoint name followed by ENT.
6-10