Garmin GPS 65 - Manual (Page 30)

TstnrnsñmFT
»»RG
100
»RMG
12.2
» t r k 1 8 9 » g s
B.B
l.D 1.0
■ ■ ■ « ■
HBHüiamwai oru
Press ENT. A navigation page is
then displayed.
Select Uie NAV Svimmary Page
with the NAV softkey. Now back
to our trip.
GO TO Gf^RMIN
>RR g 1BB>RHG 1 2 , 2
^RK 100 ms
l.D
1.0
•I 01
MSM PLOT epi MRU
GO TO GARMIN
lee »RHG 12.2
^
trk
IBB^
c
^ 15. B
1.0 1.0
t
F-LOT H f l U
Set the Simulation Speed...
* Wilh the arrow keys move the
cursor to the ground speed field.
(If this field does not currently
indicate "GS’', for ground speed,
highlight that field with the left
arrow key and press CLR until it
does.)
Enter a ground speed of 15 knots
by pressing “l^ “5", and ENT.
(The GPS 65 will accept speeds of
up to 90 knots.) The simulation
speed is now set and the GPS 65 is
simulating
a trip from coordinates
N39“ W95“ to the “GARMIN”
waypoint (our Lenexa, KS facQity).
Examine the Navigation Information.»
At this point, you can explore the capabilities of the GPS 65. While you
are on the Navigation Summary Pгlge, you may want to examine other
information not currently displayed (see Section 3.8).
• As Üie unit is nav^aüng, you will notice the Range (RNG) to
GARMIN decreasing. If you wish to see the distance back to where
you started from, highlight this field (top r^ht) vrith the arrow
keys, and press CLR until distance made good (DMG) is displayed.
3-16