Garmin GPS 65 - Manual (Page 31)

‘ Highlight the ground speed (GS) field (bottom right) and press
CLR until the estimated time enroute (ETE) is displayed.
• Highlight the ground track (TRK) field (bottom left) and press
CLR imtil groundspeed (GS) is displayed.
• Highlight the bearing (BRG) field (top left) and press CLR until
ground track (TRK) is displayed.
You now have
eui
entirely different Navigation Summary Page that
should look somethii^ like this:
eo TO GARMIN
dsb
IBB^
diig
1.58
ms
IS
►ETE
42:35
^ 1.0
• A • « ■ • ■
I^OSIITLOT CDl »ftU
l.D
mum
T
GO TO GARMIN
Let's Look at a Different Navigation Page».
► TRK iee.Dnc3.48
Mis 15‘E’ e 34:55
l . a A 1 . 0
• « a ■ « A a a a a a
rgigiraoguCTi hau
Move the cursor to the page
options with the arrow keys.
Select the Graphic GDI Page with
the GDI softkey, (the “3” key in
this case).
TftKiao' coftHiii« isKT
88G iaO~ ftMGT.THH 30:57
mai^iHaBn cdi
The Graphic GDI Page shows the
“highway" display. Note the
ground track (TRK), destination
waypoint, and ground speed (GS),
on the top line. On the bottom
line, beaiing (BRG), range (RNG),
and estimated time enroute(ETE),
are displayed.
3-17