Y-cam Bullet HD 1080 (1st Gen) - Manual (Page 10)

Page 10
2.21 microSD card installation for Y-cam Bullet HD 1080
Inserting a microSD card into the Y-cam Bullet HD 1080 requires you to remove the back section of the camera. For this
reason, it is advised not to do this once the camera has been mounted in a wall or in a non-easily accessible place.
Unscrew the front part of the camera and lift this carefully from the lens array. Be careful not to break the lens or
infrared LEDs.
The microSD card slot is situated behind the back section.
The card can only be inserted into the camera with the golden pins of the microSD card facing towards the metal
bracket. The SD card should not be forced into the SD card slot as this may damage the Y-cam.