Y-cam Bullet HD 1080 (1st Gen) - Manual (Page 58)

Page 58
6.6.6 Periodic Sending - FTP
The Y-cam can be configured to upload an image to an FTP when the Motion Detection alarm is triggered.
[FTP alarm management] Enable/Disable FTP upload on motion detection.
[Trigger Time] The number of seconds that the camera should keep sending images after motion stops.
[Trigger FPS] The number of frames per seconds that the camera should keep sending images at when an alarm is
triggered.
[Interval Time] Time interval between uploads.
[FTP Server ID] Select the FTP Server number from the list (set under STORAGE Menu)
[Remote path] Path where to save the image file on the FTP server.
[Snapshot From] Select the stream from which it should get the snapshot.
[Image file name] A name for the Image.
Effective Period:
[Always] Always trigger the alarm upon motion detection.
[Schedule] FTP periodic sending effective period according to schedule.