Y-cam Bullet HD 1080 (1st Gen) - Manual (Page 47)

Page 47
6.4.4 FTP Server
The Y-cam can upload an image to an FTP server upon receiving an alarm from the motion detection window or at
specific time intervals. FTP is a commonly used protocol for exchanging files over any network or the internet and there
are a number of FTP providers which will allow you to upload the images free of charge. FTP could also be used to
upload the images to a NAS drive.
The Y-cam can be configured with four different FTP servers. These servers can be individually connected to either
upload on motion detection or upload periodically. These functions are available under the TIME RECORDING and
MOTION RECORDING menu.
[FTP Server ID] Select the ID of the FTP server. You can connect to up to four FTP Servers.
[FTP server name] Please enter the name you want to give to this FTP server.
[FTP server IP] Type the name or IP address of the FTP server.
[FTP server port] The port number of the FTP server (default is 21).
[Anonymous] Enable or disable anonymous login.
[User name] Type your FTP user name (Required if Anonymous set to “No”)
[Password] Type your FTP password (Required if Anonymous set to “No”)
[Re-type password] Re-type your password (Required if Anonymous set to “No”)
Click SAVE SETTINGS to confirm your settings.