Y-cam Bullet HD 1080 (1st Gen) - Manual (Page 31)

Page 31
6.2.4 UPnP Setup
Y-cam supports UPnP (Universal Plug and Play) which is enabled by default.
This allows your camera to easily talk to your router.
[UPnP] Enable or disable the UPnP function.
We recommend you to have UPnP enabled. For most users of Y-cam, the rest of the settings can be left as the default
settings.
6.2.5 Network Port
[HTTP port] : The default HTTP port number is 80.
[RTSP port] In order to view video over RTSP the router should be setup to forward a port in the range 30000 to 30100
to the camera’s IP address using UDP with an internal port in the range of 30000 to 30100. Refer to your router manual
for further details.
UPnP HTTP/RTSP port range:
By default, this port range is 8150 – 8350.
6.2.6 RTSP Authentication
[Authentication Enable] Enabled by default. Uncheck box to disable RTSP Authentication.