Y-cam Bullet HD 1080 (1st Gen) - Manual (Page 42)

Page 42
6.3.4.6 Backup, restore, reset and reboot
You can reset the camera to its factory defaults, backup the configuration in case of accidental reset and restore the
camera’s settings from a backup.
[Backup settings] Click Backup to backup the current configuration of the Y-cam for future reference. Once you have
your camera setup as you require, this is recommended.
To restore a backup file:
[Restore settings] Click Browse... to search for a backup configuration you wish to upload to the camera, then click
Restore.
Note: Do not turn off the power during the Restore function since this might corrupt the camera’s firmware
[Reset settings] Click Reset to initialize the Y-cam to default factory settings. All users and settings will be lost, requiring
you to reconfigure the camera.
[Reboot system] Click Reboot to reboot the camera.