Y-cam Bullet HD 1080 (1st Gen) - Manual (Page 27)

Page 27
If you have connected your camera to your network via a router or switch, you will need the settings for “Infrastructure”
setup. If you have connected your camera directly to a computer, you will need the next section for “Ad-Hoc” setup.
6.2.1.1 Infrastructure Wireless Setup Options
[Security] Select the type of security mode that your wireless network is using. None (i.e. off), WEP64, WEP128, WPA-
PSK or WPA2-PSK
Whichever you are using, you will need to enter the settings to connect to your router. Each mode has default settings,
which should suit most installations.
The “key” your Y-cam requires is the password you use to access your Wi-Fi / Wireless Connection. You need to enter
this twice so it matches.
Security Mode Options
[Authentication] Select the type of authentication that your router requires.
[Security] Select the WEP/WPA key type, either in hexadecimal (Hex) or ASCII characters. Note: Most routers provide
WEP keys in Hex format. Select either TKIP or AES for your default encryption setting.
Once you have entered your settings, click “SAVE SETTINGS”.
Note: The settings you enter to connect to your Wi-Fi / Wireless access point or router need to be correct. Please
contact the provider of the Wireless router or access point, or consult the equipment manual on how to verify or modify
these settings.