Y-cam Bullet HD 1080 (1st Gen) - Manual (Page 45)

Page 45
6.4.3 E-Mail Server setup
The Y-cam can be configured to send an E-mail when the motion detection alarm is triggered or after specified intervals.
The Y-cam can be configured with four different E-mail servers. These servers can be individually connected to either
send on motion detection or periodically. These functions are available under the TIME RECORDING and MOTION
RECORDING menu.
[e-Mail server ID] Select the email server ID. You can set up to four email servers.
[SMTP server name] Please enter the name you want to give to this SMTP e-mail server.
[SMTP server IP] Type the name or IP address of the SMTP server you want to use for sending the e-Mails. Please note
that some networks do not allow e-mail relaying. Check with your system administrator or Internet service provider for
more details.
[SMTP server port] The port number of the e-mail server (default is 25).
[Secure TLS Connection] Select whether your SMPT server requires an TLS connection.
[User name] & [Password] Type the user name and password of the e-mail account you wish to use. This field is
required if your SMTP server requires authentication.