Y-cam Bullet HD 1080 (1st Gen) - Manual (Page 29)

Page 29
6.2.2 TCP/IP Setup
The Y-cam is setup to obtain an IP address automatically (DHCP) from your Network by default, so these settings should
not be needed by most users. Should you wish to assign the IP address manually, use this page to enter the address
details.
If your network supports a DHCP server (e.g. router) select this option to have the IP address is assigned automatically.
If you select Obtain an IP address automatically you should select Obtain a DNS Server address automatically.
[DHCP Service]
[Static IP Address] Select this option when a fixed IP is required.
[IP address] Type the IP address of your camera (Required)
[Subnet mask] Type the subnet mask (Required)
[Default gateway] Type the default gateway (Required)
[DNS 1] Type the IP address of the primary DNS server (Required)
[DNS 2] Type the IP address of the secondary DNS server, if necessary (Optional)