9 port forwarding if upnp is not available, 3 camera menu, Ort forwarding if – Y-cam Bullet HD 1080 (1st Gen) User Manual
Page 33: Upnp, Is not available, Camera, Menu
Page 33
6.2.9 Port forwarding if UPNP is not available
If you are not using UPNP, or UPNP is disabled on your router, you will need to open a port on your router so that you
can access your Y-cam from the internet.
If you are unsure if UPNP is working on your camera, visit your Y-cam Settings System page. Under UPNP port
forwarding it will labelled as “Success”, “No UPnP Gateway” or “Disabled”.
Firewall security features built into some routers may prevent the camera’s UPNP from configuring your router. Your
router connects to the Internet over a series of “ports” and sometimes the default ports used by the Y-cam are blocked
from access over the Internet, therefore, these ports need to be made accessible.
This is achieved using the Port Forwarding function on your router. The ports used by the camera must be opened
through the router for remote access to your Y-cam. Check your router’s user manual for specific instructions on how to
open and route ports on you router or you can find instructions for how to do this for your specific router on the
following website:
2. Scroll down to select your router model number
3. Select Y-cam IP Wireless camera.
6.3 CAMERA MENU
The CAMERA menu is located within the main navigation menu bar. When you click on the word “CAMERA”, a sub-
menu of camera setup options will be displayed.