BendixKing AV8OR Ace - Users Guide - Manual (Page 107)

Honeywell Bendix/King AV8OR Ace User’s Guide
D200904000003 Aviation Mode Operation
Rev 3 Mar 2012 Page 2-63
© Honeywell International Inc. Do not copy without express permission of Honeywell
When flying on a course using the Direct-To function, if the
aircraft
gets away from the course line on the map, the pilot can
easily create a new course line to the destination from the aircraft’s
present position by using the steps that follow:
Tap the hard key from the Map page to display the virtual
keyboard. The active Direct-To destination will already be filled in on
the keyboard.
Figure 2-56: Re-center aircraft – Step 1
Tap the Enter soft key to use the entered WPT and re-center the
course line from the aircraft’s present position to the destination.
Bypass a WPT with a flight plan active
When a flight plan is active, the pilot may want to bypass one of the
WPTs in the flight plan and go direct to one of the other WPTs. Use
the steps that follow to bypass a WPT.
1. The active course shows as a magenta line on the Map.
2. Tap on the hard key to display the Active Flight Plan page.