BendixKing AV8OR Ace - Users Guide - Manual (Page 336)

Honeywell Bendix/King AV8OR Ace User’s Guide
Automotive Mode Operation D200904000003
Page 3-78 Rev 3 Mar 2012
© Honeywell International Inc. Do not copy without express permission of Honeywell
Soft Key
Description
the deleted point.
The Cursor is appended at the end of the
route as the new destination. The previous
destination is demoted, and becomes the last
via point.
This soft Key is similar to the soft Key, but a
new screen opens, and the route is
calculated with all the possible route
calculation methods (Fast, Short, Economical
and Easy). Observe the results, and choose
one of the routes to navigate.
The Cursor becomes the start point of the
route. This means that the route will not be
started from the current GPS position, and
Automatic Off-route Recalculation needs to
be turned off to keep the start point the
selected one.
Soft Key Description
If the Cursor is at or near the selected start
point, this soft Key replaces the previous
one, and deletes the start point from the
route. The current GPS position is used
again as the start point, and Automatic Off-
route Recalculation is re-enabled.
The Cursor is saved as a user POI. Select
the POI group and give a name for the POI,
then select a suitable icon, enter a phone
number, and additional information if you like.
Map locations can be marked with Pins.
Unlike POIs, a Pin has no name and other
details, only a color to let you tell one from
another on the map.
If the Cursor is at or near a Pin, this soft Key
replaces the previous one, and deletes the
Pin the Cursor is near to.