BendixKing AV8OR Ace - Users Guide - Manual (Page 78)

Honeywell Bendix/King AV8OR Ace User’s Guide
Aviation Mode Operation D200904000003
Page 2-34 Rev 3 Mar 2012
© Honeywell International Inc. Do not copy without express permission of Honeywell
Figure 2-25: Smart Profile – Airspace Vertical Boundaries
Auto Zoom
The Auto Zoom function automatically changes the zoom level on
the map page. The Auto Zoom function can be turned ON or OFF or
be suspended. See the Map Setup section on page 2-185 for
instructions on how to change the Auto Zoom mode.
With Auto Zoom enabled, when flying the last leg of a Flight Plan or
when flying a Direct To, the system automatically zooms to a screen
range that keeps the destination WPT within the display area. The
system continues to zoom in to the lowest zoom level.
When the lowest zoom has been reached and the aircraft begins to
fly away from the destination WPT, then the system zooms out
automatically to keep the WPT within the display area.
When auto zoom is in operation AUTO (Automatic) is shown in the
RNG (Range) display field.
Figure 2-26: Auto Zoom Mode
Pushing either the ZOOM IN or ZOOM OUT hard key suspends the
auto zoom capability. An “Auto Zoom Suspended” message shows
on the top of the MAP page for a few seconds.