BendixKing AV8OR Ace - Users Guide - Manual (Page 243)

Honeywell Bendix/King AV8OR Ace User’s Guide
D200904000003 Aviation Mode Operation
Rev 3 Mar 2012 Page 2-199
© Honeywell International Inc. Do not copy without express permission of Honeywell
Tap on the OK soft key to accept the new ident name or tap the
CANCEL soft key to cancel the ident name change.
Figure 2-200: Demo Mode Setup Ident Details
•
Initial Position: Determines the latitude and longitude of where
the simulator flight starts. The user can input the latitude and
longitude.
•
Altitude: The simulators altitude can be set to any altitude
between 0 and 99900 feet in 100-foot increments or between 0
and 30500 meters in 100-meter increments.
•
Groundspeed: The simulators speed can be set to any value
between 0 and 999 in any of the selected speed units.
•
Track: Set the initial track from the initial WPT. Track can be set
to any value between 0 and 359 degrees.
When all the parameters have been entered tap the RESTART
DEMO soft key to restart the simulator and return to the System
Setup Menu.
DEVICE SETUP PAGE
This page lets the user to configure the external interfaces (GPS
Receiver, Flight Plan Device, and WX Receiver) to the unit.