BendixKing AV8OR Ace - Users Guide - Manual (Page 76)

Honeywell Bendix/King AV8OR Ace User’s Guide
Aviation Mode Operation D200904000003
Page 2-32 Rev 3 Mar 2012
© Honeywell International Inc. Do not copy without express permission of Honeywell
arrow is displayed to the right of the cross track error value indicating
the direction to steer to reduce the cross track error.
VFR Moving Map Operation
MAP ZOOMING
Press the ZOOM IN or ZOOM OUT hard key to change the current
map range to the next value. Holding either hard key smoothly
increments or decrements (changes the range by 10 percent)
through the ranges permitting the user to stop at almost any range
value desired. Pushing the opposite ZOOM hard key steps the range
in the opposite direction. The map range value will be displayed on
the
RNG label.
When the pilot operates the unit outside of the data base region
contained on the SD card and zooms into a range that requires the
high resolution terrain data, the pilot will see a purple background
screen color and a message stating “Outside Database Region”.
This warning and alert is issued at all zoom levels where the high
resolution terrain data is not available.
MAP VIEW
Tapping the MAP VIEW soft key on the MAIN MAP DISPLAY
window brings up the CHANGE VIEW soft key as shown in the
figure below.
Figure 2-23: Map – Map View Setup