Route planning options, Route planning options -105 – BendixKing AV8OR Ace - Users Guide User Manual

Page 363

Advertising
background image

Honeywell Bendix/King AV8OR Ace User’s Guide



D200904000003

Automotive Mode Operation

Rev 3 Mar 2012

Page 3-105

©

Honeywell International Inc. Do not copy without express permission of Honeywell

Soft Key

Description

Master Volume

Use the switch to mute all sounds of the
device and then to re-enable them again. The
position of the fader determines the volume
level. The loudness of

GoDrive

is

independent of your device settings. When
you exit the program, the device default
settings return.

Voice Guidance
Volume

The slider adjusts the loudness of voice
prompts. In its leftmost position, the voice
guidance is suppressed; in its rightmost
position, the master volume applies.

Key Sounds

Key sounds are audible confirmation of either
pressing hardware soft Keys or tapping the
touch screen. The switch turns the key
sounds on or off. Key sounds are played at
the master volume level.

Dynamic Volume

When driving at high speed, the noise in the
car may be too loud to clearly hear the voice
guidance and other sounds. Using Dynamic
Volume you can instruct

GoDrive

to increase

the volume when your speed exceeds a
certain minimum, and reach its highest
volume at the given maximum speed.

Route Planning Options


These settings determine how routes will be calculated. Tap the

following soft Keys:

,

,

.

Soft Key

Description

Vehicle

You can set the type of vehicle you will use to
navigate the route. Based upon this setting,
some of the road types will be excluded from
the route (e.g. motorways for pedestrians), or
some of the restrictions may not be taken into
account (e.g. emergency vehicles have only a
few restrictions).

Advertising