Traffic setup, Traffic setup -157 – BendixKing AV8OR Ace - Users Guide User Manual

Page 201

Advertising
background image

Honeywell Bendix/King AV8OR Ace User’s Guide

D200904000003

Aviation Mode Operation

Rev 3 Mar 2012

Page 2-157

©

Honeywell International Inc. Do not copy without express permission of Honeywell

FIELDS ON THE TRAFFIC PAGE:

•

Traffic Alerts targets show as a solid yellow circle.

Traffic alerts are used for targets within 0.7 nm range and
within 700 ft of the same altitude.

•

Traffic Advisories targets show as a white diamond

icon. Traffic advisories are used for targets outside the
Traffic Alerts zone and within 2.0 nm and 1000 ft altitude.

•

Other targets show as a black diamond with a white

border. The black diamond icon is used for targets that are
outside the Traffic Alerts zone and the Traffic Advisories
zone.

•

The altitude of traffic target is shown above the

target symbol if the aircraft is above own aircraft altitude.

•

Altitude of traffic target is shown below the target symbol if
the aircraft is above own aircraft altitude.

•

A vertical trend is shown with a down arrow to the

right of the target symbol if altitude trend down is 500 ft/min
or greater. The Altitude trend is shown with an up arrow to
the right of the target symbol if altitude trend up is 500 ft/min
or greater.

TRAFFIC SETUP

Tap the

TRAFFIC SETUP

soft key on the Traffic page to change the

setup settings as shown in the figure below.

Advertising