BendixKing AV8OR Ace - Users Guide User Manual

Page 147

Advertising
background image

Honeywell Bendix/King AV8OR Ace User’s Guide8

D200904000003

Aviation Mode Operation

Rev 3 Mar 2012

Page 2-103

©

Honeywell International Inc. Do not copy without express permission of Honeywell

•

A pilot entered descent rate is used if available, otherwise a
default value of 500 ft/min is used.

The TOD point is indicated on the flight plan path by a symbol
consisting of small white box with a black outline and double black
chevrons.

•

For a descent, the chevrons point downward and are placed
below the box as shown in the following symbol:

•

For a climb, the chevrons point upward and are placed
above the box, as in the following symbol:

•

Straight line segments along the flight plan path between
current position and the target are used.

•

If the target waypoint is an airport, the default target altitude

is

set to the airport elevation plus 1000 feet.

•

The TOD is located along the flight plan path using the
distance along the flight plan path.

•

If the calculated TOD is ahead of the aircraft in the flight plan
path, then:

o

A pop-up alert message “Approaching Descent
Point” (TOD alert) or “Approaching Climb Point”
is displayed 60 seconds prior to reaching the
TOD

o

The message remains in view until the TOD is
reached unless replaced by a higher priority
message.

•

When the aircraft reaches the TOD or if the calculated TOD
is behind the aircraft in the flight plan path, then:

Advertising