BendixKing AV8OR Ace - Users Guide - Manual (Page 87)

Honeywell Bendix/King AV8OR Ace User’s Guide
D200904000003 Aviation Mode Operation
Rev 3 Mar 2012 Page 2-43
© Honeywell International Inc. Do not copy without express permission of Honeywell
Figure 2-35: Airport – Rnwys Page
Tap the CLEAR soft key to return to the MAP page.
Tap the SELECT RUNWAY soft key to show an extend centerline
for the selected runway on the MAP page.
Tap the CHARTS soft key to show the Charts and Procedures
available for the airport.
Tap the PTR MENU soft key to center the map on the selected
airport.
SELECT RUNWAY Soft Key
Tap on a runway listed under the Runway Details menu to highlight
the runway. Tap on the
SELECT RUNWAY soft key to cause
extended centerlines to be drawn from both ends of the runway on
the MAP page.
The centerlines extend to 10 nm from each side of the airport symbol
and show whenever the range is less than or equal to 100 nm.
The extended runway centerlines are displayed in a light blue and
white line as shown below.