CANOGA PERKINS 9145ELB NID Software Version 4.01 - Manual (Page 107)

CoS Configuration 9145ELB NID Software User’s Manual
CoS Queues Configuration
97
• If you selected AFEF in step 2, Figure 9-11 opens. See the section “Assured For-
warding (AF)/ Expedited Forwarding (EF)” on page 98.
5. Press Esc to return to the Class of Service Queue Configuration screen.
9.3.2.1 IP Precedence Mode
On the User Port Untagged Packet Classifier Mapping screen (Figure 9-9) for IP Precedence:
1. Type the number of the IP Precedence (or a range of numbers), and press Enter. The
CoSQ setting in the column beside the IP Precedence number is highlighted.
2. Press the Space bar to scroll through the available queues.
3. Select a queue and press Enter. (Only a queue that is enabled can be selected. To
enable or disable a queue, see “Queues Configuration on Network Ports” on page 101.)
4. Press Esc to return to the User Port Untagged Packet Classifier Configuration screen.
Figure 9-9 User Port Untagged Packet Classifier Mapping screen (IP Precedence mode)
9.3.2.2 Differentiated Service Code Point (DSCP) Mode
On the User Port Untagged Packet Classifier Mapping screen (Figure 9-10) for DSCP,
1. Type the number of the DSCP (or a range of numbers), and press Enter. The CoS setting
for that DSCP number is highlighted.
2. Press the Space bar to scroll through the available queues.
3. Select a queue and press Enter. (Only a queue that is enabled can be selected. To
enable or disable a queue, see “Queues Configuration on Network Ports” on page 101.)
Canoga Perkins Corp. Ethernet 1G/10G Network Interface Device 29-AUG-2011
9145ELB-971-4-0 V04.01 10:55:13
---------------- USER PORT UNTAGGED PACKET CLASSIFIER MAPPING ------------------
Mode: IP Precedence Mode
IP Precedence CoSQ
------------- ----
0 Q1
1 Q1
2 Q1
3 Q1
4 Q2
5 Q2
6 Q3
7 Q3
Select IPP or a Range x-y [0-7]:
------------------------------------Messages-----------------------------------