CANOGA PERKINS 9145ELB NID Software Version 4.01 - Manual (Page 90)

9145ELB NID Software User’s Manual Utilities
Static ARP Table
80
7.6 Static ARP Table
The Static ARP table is used to define mapping between IP address and MAC address, and
assign them to a port, thus bypassing the ARP mechanism. A maximum of 10 static ARP entries
are available.
From the Utilities Menu, type 7 and press Enter. The Static ARP Table screen (Figure 7-4)
opens.
Figure 7-4 Static ARP Table screen
1. To add an entry to the static ARP table, type 1 and press Enter.
• Type the IP address and press Enter.
• Type the Mac address and press Enter.
• Type the port number and press Enter.
The address information is added to the table.
2. To delete an entry from the Static ARP Table, type 2 and press Enter. The first table entry
will be highlighted. Press the Space bar to scroll through the entries. Press Enter to
delete the highlighted entry.
3. Press Esc to return to the Utilities Menu.
Canoga Perkins Corp. Ethernet 1G/10G Network Interface Device 29-AUG-2011
9145ELB-971-4-0 V04.01 10:55:13
------------------------------------STATIC ARP TABLE---------------------------
IP Address MAC Address Port
172.16.2.155 00-18-8B-82-8C-6F Usr1
172.16.2.156 00-18-8B-33-8C-6F 10G1
172.16.2.157 00-18-77-82-8C-6F Mgmt
Add or Delete an entry (1=Add, 2=Delete from table):
------------------------------------Messages-----------------------------------