CANOGA PERKINS 9145ELB NID Software Version 4.01 - Manual (Page 98)

9145ELB NID Software User’s Manual Software Upgrade
Software Upgrades Using FTP or SFTP
88
8.5.3 Hardware Reset
A hardware reset clears all memory. Traffic ceases and the FPGAs are reloaded. Counters are
cleared on all ports. The software is reconfigured based on the active image and its
configuration. Prior to hardware reset, a log message will be generated, noting this request.
To reset the hardware, type 5 and press Enter. The system will go silent during the reboot period
and will not be accessible. Traffic will cease until software has reloaded the FPGAs.