CANOGA PERKINS 9145ELB NID Software Version 4.01 - Manual (Page 46)

9145ELB NID Software User’s Manual System Configuration
System Information
36
3.4 System Information
The System Information screen is used to add or edit administrative and circuit information, such
as the name of the 9145ELB, contact, location, customer, circuit, equipment codes and Common
Language Equipment Identification (CLEI) information.
System Name, Contact, and Location are the same as the MIB-II variables sysName,
sysLocation, sysContact.
1. From the System Configuration menu, select System Information (5) and press Enter.
The System Information screen (Figure 3-21) opens.
2. Type the number of the parameter to enter information about, then press Enter.
3. Type new information or edit existing information and press Enter.
4. To return to the Main Menu, press Esc. Press Esc again to return to the System
Configuration menu.
Figure 3-21 System Information screen
1. System Name The system name can be up to 25 characters long. It is displayed in the
header under Ethernet Network Interface Device. If you are running multiple telnet
sessions, you will be able to identify the NID you are viewing.
2. Contact Maximum of 25 characters.
Canoga Perkins Corp. Ethernet 1G/10G Network Interface Device 29-AUG-2011
9145ELB-971-4-0 V04.01 10:55:1
------------------------------SYSTEM INFORMATION-------------------------------
1 System Name : Canoga 9145ELB 32 device
2. Contact : Contact
3. Location : Canada
4. Customer : MyCustomerName
5. Information : Information1
: Information2
6. Circuits : Circuits1
: Circuits2
7. Service Code : 1234567890
8. Date-in-Service : 03/04/2010
9. Date-Out-of-Service : 03/01/2010
10. Equipment Type : Test Equip
11. Equipment Code : 1234567890
12. Vendor : Canoga Perkins
13. CLEI : 1234567890
14. Mfg Date : 01/01/2010
Select [1-14]:
------------------------------------Messages-----------------------------------