CANOGA PERKINS 9145ELB NID Software Version 4.01 - Manual (Page 109)

CoS Configuration 9145ELB NID Software User’s Manual
CoS Queues Configuration
99
4. Press Esc to return to the User Port Untagged Packet Classifier Configuration screen.
Figure 9-11 User Port Untagged Packet Classifier Mapping screen (AFEF Mode)
9.3.3 Queues Configuration on User Ports
From the Class of Service Queue Configuration screen (Figure 9-4), type 3 and press Enter. The
Edit Queue Configuration on User Ports screen (Figure 9-12) opens.
Type the number of the attribute you wish to configure and press Enter. Press Esc to return to
the Class of Service Queue Configuration screen.
The same set of configuration attributes applies to every User Port.
1. Enable/Disable a Queue Each User Port has four queues: LLQ, Q3, Q2, Q1. This
function allows you to enable only those queues you wish to use. Type the number of the
queue you wish to enable or disable. Press the Space bar to select Enabled or Disabled
and then press Enter.
NOTE:The LLQ cannot be disabled and the LLQ size cannot be set to zero (0).
2. Queue Size (in 8K-Byte) The queue size can be any value from 0KB to 8MB (from 8KB
to 8MB for LLQ). To change the queue size, type 2 for LLQ, 4 for Queue 3, 10 for Queue
2, or 16 for Queue 1. Type the new setting and press Enter.
Queues require a size parameter range between 0 and 250 (between 1 and 250 for LLQ).
If you enter an invalid size parameter, the message INVALID INPUT will appear at the
bottom of the screen.
Canoga Perkins Corp. Ethernet 1G/10G Network Interface Device 29-AUG-2011
9145ELB-971-4-0 V04.01 10:55:13
---------------- USER PORT UNTAGGED PACKET CLASSIFIER MAPPING ------------------
Mode: AFEF Mode
Class 1 Class 2 Class 3 Class 4
DSCS CoSQ DSCS CoSQ DSCS CoSQ DSCS CoSQ
---- ---- ---- ---- ---- ---- ---- ----
Low Drop Precedence AF11 Q1 AF21 Q1 AF31 Q1 AF41 Q2
Med Drop Precedence AF12 Q1 AF22 Q1 AF32 Q1 AF42 Q2
High Drop Precedence AF13 Q1 AF23 Q1 AF33 Q1 AF43 Q2
Expedited Forwarding CoSQ: Q3
Default CoSQ: Q1
Select AF Code or a Range x-y [11-43], [E]F, [D]efault:
------------------------------------Messages-----------------------------------